Well since we had a bad hail storm a month or so ago , I think its time to update my old Base Coat gun of 14 years . Its showing signs of laying an uneven pattern , I could rebuild it again but why spend half as much as the new one .
I am going to Purchase a Iwata LPH-400-LVB , $500 bucks for such a little tool , but its what it takes to lay a nice paint job .
I already have One of these Iwata L{H 400 LV guns but I only Spray Clear Coat out of it , and boy does it lay a slickie , its what I used to clear my buddies 65 Chevelle .
I will also update my old primer gun too as this thick stuff is hard on paint guns , these require a big fluid nozzle to lay it on , and will most likely spend another $200-$300 bucks .
I already had to buy a new 6" DA at $200 bucks( Dual Action Sander ) This is what you use to prep sand the panels before Spraying color , my old DA went through the 1992 big hail storm , and finally shot craps
And I was looking foward to spending my money on a new Apple ( well when the new 13" MacBookPro comes out anyway
